Products (26)

The best bracket kit to fit the widest variety of boxes!  Will hold a box that is 5 1/2" to 8 1/2" wide at the bottom (Measure front to back).  Choose between our new 16", 20" or 24" Option based on your planter box size.  Up to 24" Box for 16" and up to 36" for a 24" kit.  Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 3/4" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed.   Measure before you order.   The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place.  Once this is done, simply snap on the brackets, loosen the wing nuts on the bottom, drop your planted box on the brackets, then slide the brackets up snug to the box and tighten the wing nuts. Done!    Includes: (1) Hold It Mate mounting rail (16", 20" or 24"), (2) Adjustable Universal Planter Brackets

(2) Adjustable Universal Brackets  (00730) - Adjusts on the Bottom from 5.5" to 8.5" - measure the bottom of your box, front to back wide...not the top as most boxes are flared.   Include (2) brackets and will fit on our 16", 20", 24" or 36" Mounting Rails.  Mounting rail not included in this purchase.  These are extra brackets.   

  Hold It Mate - Reconnect with your Deck! This is a Bundle of (1) 8" (00740) or (1) 10" (00715) Planter Ring.  Does not include a pot, you may use your own or bring the ring to your favorite garden center and find a perfect fit - we guarantee you will find a 8" - 10" pot that fits.   Bloem Living makes a great rolled edge planter that fits perfect!   Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure the thickness of your spindles as well as the open space between them before you order.   Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a very long life.   The only tool you need is an Allen wrench, and that is included - see below for simple installation instructions. Hold It Mate is Patented

Hold It Mate planter hangers designed exclusively for use with all lengths of the Hold It Mate Mounting Rails. Choose from  6", 8" and 10"     Hold It Mate Mounting Rails and accessories are made of powder coated steel and stainless steel hardware for lasting durability. The only tool you need is an Allen wrench, and that is included! See our blog post for the simple instructions.   Add the desired sizes you would like to the cart, and from there you may update quantity.    Don't forget to purchase a planter to match the hanger size you purchase. The sizes are also very standard, you may bring your new rings to your favorite garden center to find a perfect match and color.  

Replacement stainless steel bolts and sleeve nut kit that includes:  3 bolts in varying lengths, 1 sleeve nut and 1 Allen wrench.  This is the same kit you would have received in your original kit order of a 6" rail kit.  Fits between 1/2" and 1 3/4" vertical spindles with the Hold It Mate Mounting rails.    If you need two sets for the 20" and 36" mounting rails, just add (2) to the cart.

  Kit Includes: (2) Fixed Planter Box Brackets and (1) 16" or 24" Mounting Rail depending on length of your planter box - choose which best matches.   Fits any plastic/resin planter box tray that is 6 3/4" wide on the bottom (measure bottom of your box front to back). Use your own planter box or bring the planter box brackets to your favorite garden center and find the right fit!  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles, Hold It Mate fits up to a 5" open space.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance! 

  (2) Fixed Planter Brackets (00706) - Fits a box up to 6.75" on the bottom.  Measure your planter box on the bottom, front to back.    Includes (2) brackets and will fit on our 16", 20", 24" or 36" Mounting Rails.  Mounting rail not included with this purchase.