Products (26)

Want a shelf to hold beverages on your decks aluminum/wood/wrought iron/PVC railing?   Want a shelf between chairs on your balcony that doesn't take up so much space as a floor table does?  Want a side table for the grill?  Want a table that won't blow over in the wind?   Then this is what you need!   Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 3/4" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed.   Measure the thickness of your spindles and the space between them before you order.  The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place.  Once this is done, simply lay your wood shelf on the brackets, line up the shelf where you want it and mark the holes with a pencil - use screws that are about as long as your board is thick, no longer and with a screwdriver, screw 4 screws into the shelf - you are done!   Should take less than 15 minutes to install everything, it really is easy and simple.   Includes: (1) 16" or 24" Hold It Mate mounting rail, (2) - 10 1/2" Long Shelf brackets You will Need: 1 x 12 x 16" - 30" wood shelf depending on kit size (we recommend a cedar or sealing a pine board) (4) 3/4" wood screws that will fit through the shelf bracket holes, but not all the way through the wood top!   Also, see the tempered glass shelf a customer did in the photos, he placed rubber grippers under the glass and on the brackets to hold in place - beautiful look!   ReConnect with your Deck, with Hold It Mate!

  (2) Shelf/Flat Brackets (00719) - 10.5" Long, great to place a shelf on or a wide flat bottomed planter box - or to buy extra supports for a shelf kit. All kits include (2) brackets and will fit on our 20" (00712) or 36" (00700) Mounting Rails.   

By Popular Demand, we are excited to bring to our customers - The Hold It Mate Flag Pole Kit!  Will hold sleeved flags up to 30" wide or grommeted flags of 24" or 30".  Folds down when not in use.   Everything you need to hang a flag from your deck railing is included.  Connects perfectly to vertical spindles only - as all Hold It Mate products are.  Fits a wide range of spindle varieties from Wrought Iron, Aluminum (round or square), PVC/Vinyl, Trex Recycled varieties as well as wood!  1/2" to 1 3/4" thick spindles.   As are all Hold It Mate products, the flag kit is not permanent, but it is very secure when installed.  Mounts are fixed at 19.5" apart when installed - meaning you need at least that to mount the system. Most spindles are at least 30" long.   Follow the directions of setting up the first parts on your table or floor - the rest will come together far easier!!     

  We offer 2 hook types Upright and Extension - see images for how they may look on your railing and their measurements.  If you want to SEE your feeder, choose the Upright models, the taller your feeder - the more you may want the 34".  If you simply want to extend the hook out from your railing - choose the 32" hook kit.  27" Upright 34" Upright 32" Extension    Hold It Mate Mounting rail (included with the kits) and accessories are made of powder coated steel and stainless steel hardware for a long life.   The only tool you need is an Allen wrench, and that is included. Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle thickness & 4" open space between the spindles...which is the legal code in the US.  Wrought Iron is usually 1/2" thick, Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure your spindles before you order.  

  ALL Hooks Now In Stock!  The 27", 32” or 34" hooks are perfect for bird feeders, chimes and lanterns!  Add them to ANY Hold It Mate rail Mount! Please see the angles these hooks offer - the 32" extends out, the 27" & 34" are more upright - hence their names!  *This only includes the hook, not a rail kit, see ‘complete kits’ for those options. 

Enjoy the ease of mounting a flat iron trough on your railings with Hold It Mate's Patented System!   ***Video shows the Mounting Rail, but different brackets - showing simply to show how easy it is to install*** Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Measure the thickness of your spindles and the open space between them before you order!  Send us a message if you need further assistance! Will hold ANY flat iron/metal cocoa lined trough style planter!   WAY better than zip tying to your railing!   Our patented system connects securely to your railing and your trough will simply hang on the hooks provided!  No zipping screws into your railing/deck posts, etc.  Installs in minutes with the included Allen wrench.   No harm to your railings at all!  Attach your mounting rail up high, down low or stack them for a full flowery look!   The design ability of these things is amazing!   Oh...and the hardware virtually disappears once you've placed your planter on the hooks!    Happy Planting!

This is a replacement Tiki/Flag Mount Kit - One Singular Mount as shown in the photo.  Also includes one hardware Bag to install.